71
SERVICE INFORMATION
IMPORTANT:
n Disconnect the washer from the source of power and wait
until the wash water cools down or drains before servicing
or repairing the washer.
n Please follow all instructions in this manual and the labels as
well as basic safety precautions to avoid burns, scalds, and
electric shock.
MAINTENANCE
Disconnect from the power supply before proceeding!
n Use a slightly damp cloth to remove any dirt from the
touch pad.
NOTE: Do not use aggressive soaps, caustic chemicals,
gasoline, or other organic solvents. These materials could
damage the touch pad.
INFORMATION FOR SERVICE:
The software version, along with the washer serial
number (including order the code), must be provided in all
correspondence or inquires to Maytag.
SPECIFICATIONS:
Voltage: 200-240 Vac, 50/60 Hz
Power: max 20 VA
Output: 24 relays
Serial interface: RS485 (2 wire) networking between washer
computer and external device (PC Computer)
Display: LCD display
PROGRAMMER CIRCUIT BOARD
CPU board
I/O board
To Next Page
Loading...
