8
n The washer computer is designated for:
Washers with top dispensers.
n Wash programs are built step-by-step.
n Each step consists of a Wash Sequence and a Drain/Extraction
sequence.
n 99 wash programs with 99 steps is programmable.
Programming the Wash Sequence:
n First choose the type of Wash Sequence.
n Prewash
n Wash
n Cool Down
n Rinse
n Final Rinse
n Soak
n Spray
n No Wash
Then program all the related functions of the sequence.
The available functions are:
n Temperature
n Water Level
n Water Inlet Valves
n Wash Speed
n Reversing Interval times
n Supplies
n Sequence Time (length of step)
n Drain Valve 1–2
n Pause Signal
Each step has default settings. Many new programs will not require
changes from the suggested values.
Create a Wash Program
Rigid Mount Washers Soft Mount Washers
Model Machine Type Model Machine Type
MXR20 RX80M MXS20 FX80
MXR25 RX105M MXS25 FX105
MXR30 RX135M MXS30 FX135
MXR40 RX180M MXS40 FX180
MXR55 RX240M MXS55 FX240
MXR65 RX280M MXS65 FX280
Machine Types
This programming guide uses Machine Types for references to the
tables and text. Refer to the table below for Machine Types for your
washer.
Machine Types Used for Commercial Washers
Dry load “Machine Type”
capacity selection
Soft Mount
high spin
washer
extractors
9 kg / 20 lbs => FX80
11 kg / 25 lbs => FX105
14 kg / 30 lbs => FX135
18 kg / 40 lbs => FX180
24 kg / 55 lbs => FX240
28 kg / 65 lbs => FX280
Rigid Mount
medium
spin washer
extractors
9 kg / 20 lbs => RX80M
11 kg / 25 lbs => RX105M
14 kg / 30 lbs => RX135M
18 kg / 40 lbs => RX180M
24 kg / 55 lbs => RX240M
28 kg / 65 lbs => RX280M
Machine Type Selection for Commercial Washers
To Next Page
Loading...
