EasyManua.ls Logo

Maytronics Dolphin Liberty - Dolphin Liberty Specifications Overview; Robot Specifications; Charger Specifications; Battery Specifications

Maytronics Dolphin Liberty
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dolphin Liberty | User Instructions
3
3. SPECIFICATIONS
3.1. Robot specifiactions
• Motor protection: IP 68
• Minimum pool depth: 0.80m (2.6ft)
• Maximum pool depth: 5m (16.4ft)
The pool water conditions must be within the following parameters:
PH 7.0-7.8
Temperature 6°-34°C (43°-93°F)
Salt Max 5,000 ppm
Chlorine Max 4 ppm
3.2. Charger specifications
Digital switch-mode charger:
• Input: 100-250AC volts
50-60Hz
115W
• Output: 26 VDC
IP 54
3.3. Battery specifications
• Application: Robotic pool cleaner
• Battery type: Lithium ion
• Battery Configuration: 6S4P
• Nominal Voltage: 22.2V
• Maximum Charge Voltage: 25.2V
• Discharge Cut-off Voltage: 18V
• Typical Capacity: 10400mAh
• Standard Discharge Current: 1.7A
• Maximum Charging Current: 4.5A
• Operating Temperature: 0°-45°C / 32°-113°F (charging)
-10°-60°C / 14°-140°F (discharging)
• Storage Temperature: 0°-30°C / 32°-86°F
• Safety Device: Each cell is equipped with a safety vent system. Each pack is equipped
with a protection circuit against over-voltage, over-discharge and over-current.
• Safety Regulation: UL1642, (UL file no.: MH21015), UN38.3

Related product manuals