Maytronics Dolphin Liberty - Using the Dolphin Liberty Pool Cleaner; Preparing the Dolphin Liberty Robot for Use

Dolphin Liberty | User Instructions
5
5. USING THE POOL CLEANER
5.1. Preparing the robot for use
5.1.1. Assembling the Caddy kit
For instructions on how to assemle the Caddy see page 18.
5.1.2. Caddy and charger positioning
Position the charger at a distance of at least
3m (10ft) from the edge of the pool.
5.1.3. Adjusting the handle angle
The robot’s handle should be adjusted and locked diagonally in order to ensure optimum cleaning
results.
The handle angle can be adjusted also to determine the speed at which the robot advances along
the water-line.
To adjust the handle angle:
A. Press the latch down and hold it in position.
B. Move the handle to the desired position and release the latch to hold the handle in place.
10ft/3m
Master4D02B
A
B