MBIT Technologies
*
www.mbit.com.au 36
7.5.8 Routing
7.6 SIP Account
7.6.1 Line 1
In this webpage, users can configuration the information about SIP account1, including the following 4
parts: Basic, Audio Configuration, Supplementary Service Subscription and Advanced.
Following is the description about that.
7.6.1.1 Basic
Set the basic information provided by your VOIP Service Provider, such as Phone Number, Account,
password, SIP Proxy and so on.
Field Name Description
Destination Destination address
Host/Net Both Host and Net selection
Gateway Gateway IP address
Interface LAN/WAN/Custom three
options, and add the
corresponding address
Comment Comment
Field Name Description
Line Enable If or not enable Line 1
Peer to Peer If or not enable PEER to PEER
If enable, SIP-1 will not send
register request to SIP server;
In System Status, SIP-1 Status
is Registered;
SIP-1 can make call out, but
others can not call SIP-1.
Proxy DNS Type Choose DNS type from A Type
and DNS SRV.
Use VPN If or not enable VPN
Domain Name The domain of SIP Server
SIP Server The IP address of SIP Server
SIP Port The port which SIP Server
supports for VOIP service,
default is 5060
Outbound Proxy Outbound Proxy IP or domain
name
To Next Page
Loading...