MBIT TECHNOLOGIES bb100 - Supplementary Services Subscription; Advanced

MBIT Technologies
*
www.mbit.com.au 38
7.6.1.3 Supplementary Services Subscription
7.6.1.4 Advanced
Field Name Description
Call Waiting If or not enable Call waiting.
Hot Line Fill in the hotline number.
Pickup handset or press
speaker/headset button,
bb 100100 will dial out the
hotline number automatically.
MWI Enable If or not enable MWI
(message waiting indicate).
Voice Mailbox
Numbers
Fill in the voice mailbox
phone number
MWI Subscribe
Enable
If or not enable MWI
subscribe
Field Name Description
Domain name
Mode
If or not use domain name in
the SIP URI
Carry Port
Information
If or not carry Port
information in the SIP URI.
Signal Port The local port of SIP protocol,
default is 5060
DTMF Type Choose the DTMF type from
IN_band, RFC2833 and SIP
INFO.
RFC2833 Payload
(>=96)
User can use the default
setting
Register Refresh
Interval
The interval between two
normal Register messages.
You can use the default
setting.
RTP Port Set the port to send RTP.
IP Phone will select one idle
port for RTP if you set “0”,
otherwise use the value user
set.
Cancel Message
Enable
When you set enable, an
unregistered message will be
sent before registration, while
you set disable, unregistered
message will not be sent
before registration. You
should set the option for
different Proxy.