MBIT Technologies
*
www.mbit.com.au 45
7.7.3.2 Dial Plan Syntactic
No. String Description
1 0 1 2 3 4 5 6 7 8 9 * # Legal characters
2 X Lowercase letter x stands for one legal character
3 [sequence] To match one character form sequence.
For example:
[0-9]: match one digit form 0 to 9
[23-5*]: match one character from 2 or 3 or 4 or 5 or *
4 x. Match to,,, …...
For example:
“01.”: can match ”0”, “01”, “011”, ”0111”, …….., ”01111…”
5 <dialed: substituted> Replace dialed with substituted.
For example：
<8:1650>123456：input is “85551212”, output
is“16505551212”
6 x,y Make outside dial tone after dialing “x”, stop until
dialing character “y”
For example：
“9,1xxxxxxxxxx”:bb100 make outside dial tone after
inputting “9”, stop tone until inputting “1”
“9,8,010x”: make outside dial tone after inputting “9”,
stop tone until inputting “0”
7 T Set the delayed time.
For example:
“<9:111>T2”: bb100 will dial out the matched
number “111” after 2 seconds.
To Next Page
Loading...