MBIT TECHNOLOGIES bb100 - Web Access; System Log Setting

MBIT Technologies
*
www.mbit.com.au 52
Change the password of user mode:
Step 1: Choose the user from the drop-down list.
Step 2: Input original password, default setting is
null.
Note: In admin mode, you can change the user
password directly without the password
of user mode.
Step 3: Input a new password twice time in New
Password and Confirm Password.
7.8.1.3 Web Access
7.8.1.4 System Log Setting
Field Name Description
WAN Interface
Login
If or not enable user login
WEB via Internet port.
If enable, user can access Web
to administration.
Web Login Port Set the port which used to
login WEB via Internet port
and PC port, Default is 8080,
that is why URL should have
8080.
Web Idle Timeout Set the web idle timeout time.
The web page can be logged
out after Web Idle Timeout
without any operation.
Field Name Description
SysLog Server Set the SysLog Server IP
address or domain name for
bb100.
Log Level Choose log level from None/
Error/Warn/INFO/Debug.
The priority changes from
left to right, left is the lowest,
right is the highest; the higher
priority, the more information
in syslog.
Picture 1