MBIT Technologies
*
www.mbit.com.au 44
Steps:
Adding one dial plan:
Step 1: Enable Dial Plan
Step 2: Click Add button, and the configuration table like Picture 1 will appear
Step 3: Fill in the value of parameters.
Step 4: Press OK button to end configuration.
Step 5: Press Save Settings button to save changes.
Editing one dial plan:
Step 1: Enable Dial plan
Step 2: Choose one dial plan
Step 3: Click Edit button, and the configuration table like Picture 2 will appear
Step 4: Change the value of parameters.
Step 5:Press OK button to end configuration.
Step 6: Press Save Settings button to save changes.
Deleting one dial plan:
Step 1: Enable Dial plan
Step 2: Choose one dial plan
Step 3: Click Delete button to delete the dial plan
Picture 2
To Next Page
Loading...