22
Remote Control Push-Buttons
Selects one of the twelve
High Level Audio/Video
Sources or Phono Input
Turns AC Power ON or OFF to
certain McIntosh Components
when connected via the Data Port
Adjusts the volume
level up or down
Selects Disc Player, Mu-
sic Server or Tape Re-
corder Functions and also
performs various func-
tions on a variety of
McIntosh Components
Press to Power the
C2200 ON or OFF
Use to select tuner pre-
sets, disc tracks or any
numbered operation
Selects Switched Output
2, FM Tuner Operating
Functions and Track Se-
lection on certain McIn-
tosh CD Players
Mutes the audio
Press MODE to switch between
Stereo or Mono Modes
Selects Switched Output 1,
AM Tuner Operating Func-
tions and Disc Selection on
certain McIntosh CD Players
Selects On Screen Func-
tions for McIntosh DVD
Players and certain CD
Players
Press TRIM and then
the LEVEL Push-but-
tons to select and ad-
just various functions
Selects the FF (Fast For-
ward) or REWind Mode
on a Disc Player, Music
Server or Tape Recorder;
tunes Up or Down the
AM/FM Dial
Selects Functions for McIntosh
Home Controller and as a “shift”
key when used with the AM or FM
push-buttons to select Output
(Spkr) 1 or 2
Press to REVIEW Tuner
Station Presets and selects
certain functions on McIn-
tosh CD Players
LED illuminates during
the time a remote com-
mand is sent to the C2200
Press to Power ON
the C2200
Press to Power OFF
the C2200
Switches OFF the entire
C2200 System
Notes: Push-buttons whose function is not identified above are for use with other
McIntosh Products. The Remote Control shipped with your C2200 may
differ from the illustration above; however, the functionality is the same.
To Next Page
Loading...
Need help?
General
