14
Displays On Screen Functions on the
McIntosh Music Server and a variety
of other McIntosh Components
Remote Control Push-Buttons
Press to Power the MA8000 ON
Selects one of the eight
available Audio Sources
Selects a Disc Player, Music Server or
Recorder Function. Seek Stations Up
or Down the AM/FM Dial. Select and/
or enter AM/FM Station Presets and
performs various functions on a vari-
ety of McIntosh Components
Use to select tuner presets, direct ac-
cess an AM/FM Station Frequency,
disc tracks or any numbered operation
Mutes the audio
Adjusts the volume level up or down
Selects On Screen Functions on a
variety of McIntosh Components
Selects AM Tuner Operating
Functions and Disc Selection on
certain McIntosh Disc Players
Selects FM Tuner Operating Func-
tions and Track Selection on certain
McIntosh CD Players
Press to change broadcast bands on
an external McIntosh Tuner con-
nected. Select certain functions on a
variety of McIntosh Components
Switches the Trigger 1 and/or 2
Power Control Jack(s) On/Off, refer
to “Setup, Power Control TRIG 1
and TRIG 2” on page 20 for addi-
tional information
Note: Push-buttons whose function is not identified above are for use with other McIntosh Products.
LED illuminates during the time a re-
mote command is sent to the MA8000
Press TRIM and then the LEVEL
Push-buttons to select and adjust
various functions
Selects Functions as a “shift” key
when used with the AM or FM
push-buttons to select Output 1
or 2
Press to Power the MA8000 OFF
Scrolls through the available
MA8000 Inputs
Scrolls through the available
MA8000 Inputs
Activates the TRIM
Stereo/Mono Mode
To Next Page
Loading...
Need help?
General
