2
Copyright 2023 © by McIntosh Laboratory, Inc.
Thank You from all of us at McIntosh
You have invested in a precision instrument that
will provide you with many years of enjoyment.
Please take a few moments to familiarize yourself
with the features and instructions to get the
maximum performance from your equipment.
If you need further technical assistance, please
contact your dealer who may be more familiar with
your particular setup including other brands. You
can also contact McIntosh with additional questions
or in the unlikely event of needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Technical Assistance (607) 723-3512
Fax (607) 724-0549
Customer Service (607) 723-3515
Fax (607) 723-1917
Email support@mcintoshlabs.com
www.mcintoshlabs.com
Safety First
Please read the safety instructions included in a
separate document called Important Additional
Operation Information Guide.
Please Take A Moment
For future reference, you can write down your
serial number and purchase information here.
We can identify your purchase from this informa-
tion if the occasion should arise:
Serial Number: __________________________
Purchase Date: ___________________________
Dealer Name: ___________________________
Introduction
Now you can take advantage of traditional McIntosh
standards of excellence in the MHT300. The
MHT300 Audio/Visual Receiver marries a long
tradition of uncompromising quality with the
latest home theater technologies to bring you an
unsurpassed luxury entertainment experience. The
McIntosh sound is “the sound of the music itself.”
What is in the box
Here is what is in the box besides all the shipping
materials:
• One MHT300 A/V Receiver
• One accessory package including:
• Microphone with attached cable
• Microphone stand
•
• One hardware package including:
• Two Side Rack Mounting brackets
•
•
• One manual package including this manual
• One HR085 Remote Control
• One AC power cord
• One
McIntosh wrench
Outdoor Antenna Grounding
If an outside antenna or cable system is connected
to the product, be sure the antenna or cable system
is grounded so as to provide some protection against
voltage surges and built-up static charge.
Article 810 of the National Electrical Code, ANSI/
NFPA 70, provides information with regards to
proper grounding of the mast and supporting struc-
ture, grounding of the lead-in wire to an antenna
di
scharge unit, and size of ground conductors,
location of antenna-discharge unit, connection to
ground electrodes and requirements for the ground-
ing electrode.
Example of antenna grounding as per
National Electrical Code,
ANSI/NFPA 70
To Next Page
Loading...
Need help?
General
