EasyManua.ls Logo

McIntosh MHT300

McIntosh MHT300
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Packing Instructions Part List
Qty Part Number Description
1 034492 Shipping Carton only
2 034669 End Caps
1 033836 Inside Carton only
1 033725 Top Pad
1 034576 Bottom Pad
4 017937 Plastic Feet
  
4 404080 #10 Flat Washers
1 034499 Accessory Box
2 034500 Slotted Foam
1 034501 Divider Foam
1 320338 Mic Stand Boom
1 320417 Adapter
1 320801 Microphone
In the event it is necessary to repack the equipment
for shipment, the equipment must be packed exactly
as shown below.
It is very important that the four plastic feet
are attached to the bottom of the equipment.
This will ensure the proper equipment location
on t
he bottom pad. Failure to do this will result in
shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition.
If a shipping carton or any of the interior part(s)
are needed, please call or write Customer Service
Department of McIntosh Laboratory. Refer to page 2.
Please see the Part List for the correct part numbers.
SPACER
PADS
SLOTTED
FOAM (2)
DIVIDER
FOAM
ACCESSORY
BOX
MICROPHONE
STAND
MICROPHONE
AND CABLE
MINI BOOM
MICROPHONE
ADAPTER

Related product manuals