18
SETUP: AUDIO > SUB LEVEL
Subwoofer level adjust allows for adjusting your
attached subwoofer to be adjusted from -10dB to +
10dB.
SETUP: AUDIO > BASS SYNC
For contents recorded in multi-channel such as
(LFE) may be out of sync and delayed. This function
allows you to correct the delay with an adjustment of
0 ms to 16 ms.
SETUP: AUDIO > AUDIO DELAY
Audio delay (Lip Sync) compensates for incorrect
timing between video and audio. When auto lip
automatically corrected with compatible TVs. The
adjust option allows you to manually adjust the delay
correction from the default of 0 ms up to 500 ms.
SETUP: AUDIO > SURROUND MODE
Audio Setup Menu
The audio setup menu contains the following
options:
Setting Options
Sub Level -10.0 through +10.0
Bass Sync
0-16ms
Audio Delay (Lip Sync) 0-500ms
Volu me Scale, Limit
Surround Mode Music, Movie, Game
Dynamic Range Compress* ON, AUTO, OFF
Note: Some options and settings are only available on the browser
version of the setup menu these are indicated with an *.
Setting Options
Music Through, Auto, Dolby Surround, Neural: X,
Multich Stereo, Stereo
Movie
Through, Auto, Dolby Surround, Neural: X,
Multich Stereo, Stereo
Game Through, Auto, Dolby Surround, Neural: X,
Multich Stereo, Stereo
Volume Submenu Options
Setting Options
Scale Linear, dB Level
Limit
OFF, 60, 70, 80
SETUP: AUDIO > VOLUME > SCALE
There are two choices for how to display the volume.
The default is a volume scale linear which displays
the volume on a scale of 0 (mute) to 99. The second
option is volume scale dB level. This will express
the volume as decibel (dB) level. The decibel scale is
from -103.0dB (mute) to 18dB.
Note: The displayed dB scale increments are not uniform as they
have been designed to give a meaningful level adjustment
depending on the actual level being listened to.
You can change the volume level of the MHT300
using the slider. Slide towards the right to increase
and to the left to decrease the volume level. The
current volume percentage for the linear scale or dB
for the dB scale will appear in the box to the right.
SETUP: AUDIO > VOLUME > LIMIT
Volume limit can protect equipment and/or ears
from unintended extreme volume by setting an upper
threshold for how high the volume level can be set.
of these three volume limits:
• 60 (-1.5dB)
• 70 (3.5dB)
• 80 (8.5dB)
level can not be set above the selected volume limit.
In the surround mode setup, you can assign a
surround mode to each of three sound categories:
• Music
• Movie
• Game
These three sound categories can be assigned to an
input using the trim menu, for more information refer
to “Trim Menu” on page 12. Categories make it
easier for someone unfamiliar with DTS or Dolby to
select the proper surround mode by selecting Music,
Movie, or Game which can be assigned to any of the
following choices in setup:
• Through
• AUTO (default)
• Dolby Surround
• DTS Neural:X
• Multi-Channel Stereo
• Stereo
The surround mode represented by the Trim
selections Music, Movie, and Game must be assigned
in setup. If no assignment has been made, the default
for each is Auto.
To Next Page
Loading...
