Mec 85-J - Page 55

Page 51 85
-
J - Operator’s Manual - 95803
January 2024Section 11 - Transport and Lifting Instructions
• Raise the jib slightly for platform ground clearance.
• Carefully drive the machine o󰀨 or on to the transport vehicle.
• Make sure you can see the second person giving guidance.
Note: The brakes are automatically released for driving and will automatically apply when the control
lever is returned to neutral which causes the machine to stop.
Winching
• Chock the wheels, then disengage brakes (see Brake Release Procedure on page 50).
• Carefully operate the winch to lower the machine down the ramp or pull the machine up the
ramp.
• Chock the wheels and engage the brakes before disengaging the winch.
Winch
ART_4741
Securing to Truck or Trailer for Transport
• Turn the key Selector Key Switch to OFF and remove the key before transport.
• Turn the Battery Disconnect Switch to OFF before transport.
• Inspect the entire machine for loose or unsecured items.
• Secure the chassis.
• Engage the Rotation Lock.
• Secure the platform.
Securing the Chassis
Make sure each of your chains is rated to hold the machine’s
weight (see serial number plate or Specications). Use at least 4
chains.
Do not attach chain hooks directly to the machine. Loop the
chain through the tie-down point and connect the chain hook to
the chain.
ART_5799
Be sure chains are arranged so that they do not damage the machine.