Mecmesin MultiTest-x manual
16
• A ‘local overload’ is reached (see [1], [3], [1], [4])
When a test has been completed the results will be automatically calculated and (if
appropriate) displayed together with alarm status, and ‘tolerance result’, i.e. whether
the specimen has passed or failed the tolerances specified for any calculation:
In addition to continuing to display values from the ‘live screen’, this screen is also
indicating that:
• The procedure called ‘Tutorial 1’ has been completed
• One of the required calculations is a peak load over a range of displacement
values. If more than one calculation has been specified, the display will scroll
through the results for all calculations. (This scrolling can be stopped by
pressing the [7] key, subsequently each press of this key will display the next
calculation.)
• The result for this calculation is 27.1 newtons; this result is unacceptably high.
(If it is not possible to calculate a result, ‘NA’ will be displayed upon this line.)
Note: Tutorial 1 gives a detailed description of how to plan, develop, run and refine a
test procedure. (see Appendix 5, Tutorial 1)
[1], [2] Print Menu (Downloading Data
To Next Page
Loading...
