Appendix 6: MultiTest-x Menu Options Page 1
On the following pages are flowcharts to help you to navigate the
menus on the MultiTest-x.
[1] Displaying the Main Menu
1) Procedure 1
2) Print Menu
3) Setup Menu
4) Utilities Menu
Press
[1/Menu]
[1], <1>, Choosing and Running a Test Procedure
1) Procedure 1
2) Print Menu
3) Setup Menu
4) Utilities Menu
Press
[1/Menu]
Press [Stop/BK SP]
to load default
Procedure 1
Procedure 3
Procedure 2
Procedure 4
Procedure 5
Press
<1> x1
Press
<1> x2
Press
<1> x3
Press
<1> x4
PROCEDURE 3
-0.2 N
0.00mm
DS 0.0/min
To run the test procedure
press [Start/ENT]
or
To stop the test procedure
press [Stop/BK SP]
Press
[1/Menu]
Procedure 1
To Next Page
Loading...
