Mecmesin MultiTest-x Series - Page 64

Appendix 6: MultiTest-x Menu Options Page 12
Press
[1/Menu]
[1], [4], [3] Stiffness Fact(or)
1) Procedure 1
2) Print Menu
3) Setup Menu
4) Utilities Menu
Press
[1/Menu]
1)Set Date/Time
2)Limit Type-ABS
3)Stiffness Fact
4)Procedure Name v
5)Install Defaults
6)Diagnostics
7)Calibration
8)Supervisor-ON
Press
[4]
Press
[3]
Stiffness (N/mm):
----
Enter the value in
the units indicated
and
press [Start/ENT]
[1], [4], <2> Limit Type-ABS
1) Procedure 1
2) Print Menu
3) Setup Menu
4) Utilities Menu
1)Set Date/Time
2)Limit Type-ABS
3)Stiffness Fact
4)Procedure Name v
5)Install Defaults
6)Diagnostics
7)Calibration
8)Supervisor-ON
Press
[4]
Press
<2> to toggle
between
ABS and %TARG
1)Set Date/Time
2)Limit Type-%TARG
3)Stiffness Fact
4)Procedure Name v
5)Install Defaults
6)Diagnostics
7)Calibration
8)Supervisor-ON