Mecmesin MultiTest-x Series - Page 65

Appendix 6: MultiTest-x Menu Options Page 13
[1], [4], [4] Procedure Name
Press
[1/Menu]
1) Procedure 4*
2) Print Menu
3) Setup Menu
4) Utilities Menu
1)Set Date/Time
2)Limit Type-ABS
3)Stiffness Fact
4)Procedure Name v
5)Install Defaults
6)Diagnostics
7)Calibration
8)Supervisor-ON
Press
[4]
Press
[4]
Procedure4 Name:
Procedure4
Press [Stop/Bk SP] to erase the procedure name and type the new name and
press [Start/ENT]
Procedure5 Name:
Procedure5
Procedure1 Name:
Procedure1
Procedure2 Name:
Procedure2
Procedure3 Name:
Procedure3
Press [Stop/Bk SP] to erase the procedure name and type the new name and
press [Start/ENT]
[1], [4], [5] Install Defaults
Press
[1/Menu]
Special Access
Only
1) Procedure 1
2) Print Menu
3) Setup Menu
4) Utilities Menu
1)Set Date/Time
2)Limit Type-ABS
3)Stiffness Fact
4)Procedure Name v
5)Install Defaults
6)Diagnostics
7)Calibration
8)Supervisor-ON
Press
[4]
Press [Jog Dn]
and
Press [5]
Password:
Press [Stop/Bk SP] to erase the procedure name and type the new name and
press [Start/ENT]
Press [Stop/Bk SP] to erase the procedure name and type the new name and
press [Start/ENT]
Press [Stop/Bk SP] to erase the procedure name and type the new name and
press [Start/ENT]
* the current procedure