mectron PIEZOSURGERY plus - Page 50

44
ErrorMessage ActionsRequired Description
MED-043
Defaultlanguage-English.
Select the desired language
by using the “language”
button. If the problem
persists, contact the




as the default language.
MED-044
Thedataneedtobe
synchronised.Press“OK”
assoonaspossible.
Theprocesslastsafew
seconds

operation and then run the


button.
Problem in the internal data

MED-047/MED-048
Internalproblem.
“SHUTDOWN”thedevice
thenstartitagain.

and then start it again. If the
problem persists, contact the


Internal problem.
MED-049
Thedataneedtobe
synchronised.
“SHUTDOWN”thedevice
thenstartitagain.

and then start it again. If the
problem persists, contact the



needed.
MED-050aMED-058
Internalproblem.
“SHUTDOWN”thedevice
thenstartitagain.

and then start it again. If the
problem persists, contact the


Internal problem.
MED-063
Theirrigationtubingline
shallbelledbypressing
thePUMPbuttonbefore
usingthehandpiece.
Press the “PUMP” button to

Filling cycle performed for
a time shorter than the


can be interrupted by the
operator.
MED-065
Handpiecenotcorrect,
changechannelor
handpiece.
Adopt the handpiece
suitable for the selected
channel.
Handpiece connected, but
not suitable for the channel
or not supported by the
system.
Table3 – Error Messages
NOTE: For any error message not listed
in 44 , contact the
