Medacta GMK Sphere - Annex 2 Mis Guide Compatibility

31
14. ANNEX 2 MIS GUIDE COMPATIBILITY
14.1 DISTAL FEMORAL RESECTION
The compatibility between the metal slotted distal cutting guides and the MIS metal distal cutting guide is highlighted in the
table below.
Metal slotted distal cutting
guide 02.07.10.4574
Metal slotted MIS distal cutting
guide 02.12.10.0489
Metal unslotted MIS distal
cutting guide 2.618
Metal unslotted MIS
recut guide 2.642
69.

Compatible holes
The MIS distal cutting block is intended for both left and right knees. Check that the correct side corresponding to the knee
to be operated on, can be read on the anterior surface.
MIS
70.