Mark V ProVis Injection System
2 - 2
Disclaimers MEDRAD makes no warranties on the contents of this manual, and specif-
ically disclaims any implied warranties of merchantability or fitness for any
purpose.
MEDRAD reserves the right to change specifications and the contents of
this manual without obligation.
MEDRAD reserves the right to modify the specifications and features
described herein, or discontinue manufacture of the product described at
any time, without prior notice or obligation. Please contact your authorized
MEDRAD representative for the most current information.
External Wiring and Modification: MEDRAD disclaims liability for any
modifications or interfaces with other equipment which are not in confor
-
mity with the specifications and information contained within this manual.
Such unauthorized action could jeopardize injector operation, safety, or
reliability.
Accessory equipment connected to the system interfaces must be certified
according the IEC 601-1 standards. Furthermore, all configurations with
attached accessory equipment shall comply with the system standard IEC
601-1-1. Anyone who connects additional equipment to the signal input or
output configures a medical system, and is therefore responsible that the
system complies with the requirements of the system standard IEC 601-1-
1. To obtain on-site consulting or consulting references, contact MEDRAD
Factory Service.
All drawings in this manual are for reference purposes only, and may not
reflect the construction of units produced prior to the publication of this
manual. Reproduction quality of these drawings may have been affected
by the level of reduction required. Call MEDRAD Factory Service if assis
-
tance in drawing interpretation is required.
The injection system is not intended for portable use.
Problems or
Questions
If you experience problems with any MEDRAD Injection System, contact:
MEDRAD Factory Service MEDRAD EUROPE, B.V.
MEDRAD, INC. Postbus 205
One MEDRAD Drive 6190 AE Beek
Indianola, PA 15051-0780 The Netherlands
Phone: (412) 767-2400 Phone:(31) (0) 43 3585601
1-800-MEDRAD-S FAX: (31) (0) 43 3656598
1-800-633-7237
FAX: (412) 767-4126
Nihon MEDRAD K.K.
2-4-9, Umeda, Kita-ku,
Osaka, 530-0001
Japan
Phone:+81(0)66-133-6250
FAX: +81(0)66-344-2395
To Next Page
Loading...
