Introduction
2 - 1
2 Introduction
Copyright Notice Copyright 2009 by MEDRAD, INC. All rights reserved. No part of this
manual may be reproduced in any form without prior written permis
-
sion of MEDRAD. Printed and assembled in the U.S.A.
Trademarks FluiDot, MEDRAD, and Quality for Life, are registered trademarks of
MEDRAD Incorporated.
Patents The Mark V ProVis Injection System is the subject of the following U.S.
patent numbers: 4,677,980; 4,854,324; 5,383,858.
Restricted Sale Federal (U.S.A.) law restricts the sale of this device to, or by the order
of a physician.
Applicability This manual applies to Mark V ProVis Injection Systems in the follow-
ing configurations:
PPD 100 60 XXX PRM 100 60 XXX
PPD 110 60 XXX PRM 110 60 XXX
PPD 20050 XXX PRM 200 50 XXX
PPD 220 50/60 XXX PRM 220 50/60 XXX
PPD 240 50 XXX PRM 240 50 XXX
All Mark V ProVis models are designed to be in compliance with EN
60601-1 (Safety) and EN 60601-1-2 (EMC/Emissions).
Represents compliance to the European Council Directive
concerning medical devices - 94/42/EEC.
Purpose This manual is intended to provide instructions for servicing the Mark V
ProVis Injection System (herein referred to as “the injection system”
safely and accurately. It is intended for those qualified to service the
injection system, whether they be MEDRAD Service Personnel, Labo
-
ratory Service Technicians, or MEDRAD Authorized Dealers.
Important
Safety Notice
The information in this manual is intended for people with adequate
backgrounds and experience in electronics and electromechanical
devices. Any attempt to repair a sophisticated medical device such as
the injector may result in personal injury, property damage, or patient
injury.
To Next Page
Loading...
