Mark V ProVis Injection System
15 - 8
9. Always troubleshoot in a logical sequence. Trace a condition
along the circuit paths in the unit, isolating the condition to a card
or circuit section. This process is shown on the following pages.
10. For assistance in determining the cause of a condition, or in
obtaining replacement cards, subassemblies, and parts, contact
MEDRAD Factory Service or your local dealer.
12. Check injector operations after repairs to ensure that the condition
has been corrected. Follow the Checkout Procedure outlined in
the Mark V ProVis Injection System Operation Manual.
To Next Page
Loading...
