Introduction
Thank you for your purchase of the Megger BITE5 Battery Tester. Be assured that your unit has been designed with
emphasis on reliability, simplicity, and ease of use. It will provide you with the information you need to reliably test
batteries.
Purpose of this manual
This document is the operator manual for the Megger BITE5 Battery Tester. It provides a description of the operation of
the unit as well as operating instructions. Read this manual before installing or using the equipment. Special emphasis
should be placed on all safety discussions.
Audience
This manual is written for technical personnel who are familiar with the various measurements performed by volt
meters and current meters and have a general understanding of their use and operation. Such personnel should also be
thoroughly familiar with the hazards associated with the use of this equipment and should have received proper safety
training.
If you find any discrepancies in the BITE5 or have any comments, please send them to Megger via fax, e-mail, or phone.
Megger
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown, PA, 19403
Attn: Customer Service
Fax: (214) 331 7397
E-mail: USTechSupportGrp@megger.com
For Technical Support, please consult the Megger Web Site at www.megger.com for the local distributor near you.
www.megger.com
BITE5
5
Introduction
To Next Page
Loading...
Need help?
General
