Safety
Warnings and safety precautions
WARNING!
Death, serious injury, or fire hazard could result from improper use/installation of this instrument. Read
and understand this manual before installing this instrument.
Installation of this instrument MUST be performed in compliance with the National Electric Code and any additional
safety requirements applicable to your installation.
Installation, operation, and maintenance of this instrument MUST be performed by qualified personnel only. The
National Electrical Code defines a qualified person as one familiar with the construction and operation of the
equipment and the hazards involved.
Safety Precautions
The following safety precautions MUST be taken whenever the instrument is installed:
Wear safety glasses and insulated gloves when making connections to power circuits
Hands, shoes, floor/ground must be dry when making any connection to a powered line
These warnings and safety precautions are to be used where appropriate when following instructions in this manual.
CAUTION!
The equipment could be impaired from improper use. Read the complete manual before use.
WARNING!
The equipment should not be used while its battery door is removed or if there is any visible damage
to the case or if the hardware holding the unit together has been loosened.
G
F
F
www.megger.com
BITE5
8
Warnings and safety precautions
To Next Page
Loading...
Need help?
General
