16
40,000 Counts High Resolution Mode
Press the button momentary to enter the 4
3
⁄4-digit
high resolution mode with a maximum display at
40,000 counts. Press the button to return to
3
3
⁄4-digit fast mode. The 4
3
⁄4-digit mode is available in all
functions except Frequency, Duty Cycle, Capacitance
and Diode Test.
In 3
3
⁄4-digit fast mode, the digital display nominally
updates 5 times per second to give you the maximum
measuring speed. In 4
3
⁄4-digit mode, the digital display
updates 1.25 times per second nominal to give you
smooth readings as well as the full accuracy of the meter.
Hold
Press the button to activate the hold function. T h e
a n n u n c i a t o r turns on in the LCD. Press again to
release. When in normal measuring modes, the hold
feature freezes the display for later viewing. When in
record or crest mode, however, the hold function stops
updating the measurements, and you can read throughout
the locked MAX, MIN, MAX-MIN, and AVG readings.
Release the hold function to continue record or crest.
Manual or Auto Ranging
Press the button to select manual ranging, and the
meter will remain in the range it was in when the LCD
annunciator turns off. Press the button again to
step through the ranges. Press and hold the button for
1 second or more to resume auto ranging.
Note: When the meter is in Record, Crest, Sort™, Hold,
Recall or Relative modes, changing the measuring
range manually will cause the meter to exit those
features.
Data Store & Recall
Press the button to store the displayed information.
The LCD annunciator MEM blinks twice to confir m
storage. Press the button to recall the stored data;
the LCD annunciator MEM turns on. Press any other
buttons ex c e p t to resume measurements. T h i s
feature stores the whole display data in memory for later
recall. The memory will remain even in auto-power-off
mode, and can also be recalled while you are in another
meter function. The memory will be erased if the rotary
switch is switched to the OFF position.
To Next Page
Loading...
