8
23. Beeper is enabled.
24. Indicates Auto Power Off is enabled.
25. Indicates A u t o r a n g i n g .
26.
Indicates data HOLD function is activated.
27.
Indicates the C R E S T function is activated.
28.
Indicates the RECORD function is
a c t i v a t e d .
29.
Indicates the SORT™ function is activated.
30. Indicate MAX (Maximum), MIN
(Minimum), MAX–MIN (Maximum
minus Minimum), or AVG (Av e r a g e )
reading is being displayed.
31.MEM This annunciator blinks 2 times to
confirm data storage when the STORE
pushbutton is pressed, and turns on
with the recalled data when the
RECALL pushbutton is pressed.
32.# Indicates, together with the secondary
display data, the number of event in the
S O RT™ function.
33.DATA Secondary display for Dual Display data.
To Next Page
Loading...
