Megger Three-Phase TTR - Page 10

M
AVTMTTR330 Rev 3 March 2010
2
 Checking reverse polarity at start of each test
 Via Ethernet port, an external PC or laptop can be connected to operate the
TTR (in remote control mode) or to transfer test results and to provide full
transformer test report
 Quick test mode provides the fastest testing of a transformer
 Three excitation test voltages: 80 V, 40 V, and 8 V
 Testing to ANSI, IEC, and Australian standards
 Leads marked to ANSI, IEC, and Australian standards
 Multi-lingual support
 Large, easy-to-read, full VGA color display
 Meets the requirements of both the European EMC and Low Voltage
Directives
It is recommended that the user becomes familiar with the TTR330 before ever
connecting to a transformer.