AJ0383DE ZP-AJ01E TRAX
21
5 OPERATING INSTRUCTIONS
Short
circuit
impedance
Short-circuit Impedance/Leakage
Reactance app is intended for imped-
ance measurements on the HV side
of the transformer with the LV side
shorted.
Demag
Demagnetization of transformer
core, recommended before and after
testing a transformer and in particular
before excitation current and/or SFRA
measurements.
Manual
Control
Manual Control is used to operate
TRAX in manual mode.
5.2 Manual Control
Important
Read and comply with the safety instruc-
tions “2 Safety” on page 8.
Always comply with local safety regula-
tions.
1] Press
Output generators and input channels can be selected
to perform a variety of measurements.
TIP
All generators and analog measurement
channels except transducer input and
timing channels can be accessed from
Manual Control.
Buttons in the apps
Buttons described below are common to most of the
apps.
Home
Report
Return
Apps
Generator settings
To Next Page
Loading...
Need help?
General
