Megmeet MV300 Series - Page 213

213
The above are read-only parameters. Record the basic information of the drive. The values for
P98.03~P98.05 are set by the manufacturer.
This function code is used for setting the voltage level of the drive.
0: 220V
1: 380V
2: 400V
3: 415V
4: 440V
5: 460V
6: 480V
Drive series selection 0~6P98.06
Rated curren
t
0~999.9AP98.05
Rated volta
g
e 0~999
V
P98.04
Rated ca
p
acit
y
0~999.9kV
A
P98.03