9
R4
MV300P-4T11 17.0 26.0 25.0 11
MV300P-4T15 21.0 35.0 32.0 15
MV300P-4T18.5 24.0 38.5 37.0 18.5
R5
MV300P-4T22 30.0 46.5 45.0 22
MV300P-4T30 40.0 62.0 60.0 30
MV300P-4T37 50.0 76.0 75.0 37
R6
MV300P-4T45 60.0 92.0 90.0 45
MV300P-4T55 72.0 113.0 110.0 55
R7
MV300P-4T75 100.0 157.0 152.0 75
MV300P-4T90 116.0 180.0 176.0 90
R8
MV300P-4T110 138.0 214.0 210.0 110
MV300P-4T132 167.0 256.0 253.0 132
R9
MV300P-4T160 200.0 307.0 304.0 160
MV300P-4T200 250.0 385.0 380.0 200
R9P MV300P-4T220 280.0 430.0 426.0 220
R10
MV300P-4T280 355.0 525.0 495.0 280
MV300P-4T315 445.0 590.0 585.0 315
R11
MV300P-4T355 500.0 665.0 650.0 355
MV300P-4T400 565.0 785.0 725.0 400
1.4 Technical specifications of product
Table 1-3 Technical specifications of drive
Input power
Rated voltage (V)
Three-phase: 380V~480V; continuous fluctuation of voltage:
±10%, transient fluctuation of voltage: -15%~+10% (i.e. the
range is 323V~528V); Voltage unbalance rate: ＜3%, the
distortion rate complying with IEC61800-2
Rated input current (A) Please refer to Table 1-1 and Table 1-2.
Rated frequency (Hz) 50Hz/60Hz, fluctuation range: ±5%
Output power
Standard applicative motor (kW)
Please refer to Table 1-1 and Table 1-2.
Rated capacity (kVA)
Rated current (A)
Output voltage (V)
Output with three-phase under rated input conditions: 0 ~ rated
input voltage, the error is less than ±3%
Output frequency (Hz) V/F: 0.00~3000.0Hz (unit: 0.01Hz); vector control: 0~650.00Hz
Overload capacity
G: 1 min for 150% rated current, 0.5 s for 200% rated current
P: 1 min for 110% rated current, 1 s for 150% rated current
Operation control
features
Control mode Vector control without PG, V/F control without PG
Maximum output frequency 3000Hz for V/F control, 650Hz for vector control
Speed adjusting range 1: 200 (vector control without PG)
To Next Page
Loading...