Megmeet MV300 Series - Page 39

39
Fig. 3-18 Wiring mode 2 of multi-functional output terminal
3. When the digital pulse frequency output DO (Y1 terminal used as DO) uses the internal 24V power supply
of the drive, the wiring mode is as shown in Fig.3-19.
Fig. 3-19 Connecting mode 1 of output terminal DO
4. When the digital pulse frequency output DO (Y1 terminal used as DO) uses the external power supply,
the wiring mode is as shown in Fig.3-20.
MV300
P24
COM
+24V
+5V
DO (Y 1
)
+24V
4.7k
+
-
DC
Digital
frequency
meter
Fig. 3-20 Connecting mode 2 of output terminal DO