9 Commissioning
WARNING – Danger of injury when entering a danger zone
• Only qualified personnel may work on the machine.
• Remove unauthorized persons from the danger zone.
• Block off the danger zone and mark it for third parties.
• Always wear cut-resistant protective gloves when removing casing parts or
working inside the machine.
9.1 Checking the requirements for commissioning
NOTE
Damage to property due to steam emission
Small quantities of steam may escape from the dishwasher. It is possible that
adjacent furniture swells.
• Protect adjacent furniture from swelling.
• If possible, avoid installing the machine in an area close to furniture
susceptible to swelling.
Requirements to be provided by the customer:
• Consistently frost-free storage and installation area.
• Anti-slip floor coverings provided in the work area around the machine.
• All connections are made correctly as described above.
9.2 Performing commissioning
To avoid damage or injuries during machine commissioning, please note the
following points:
• Check supplier parts (e.g. external water handling devices). More detailed
information can be found in the relevant operating instructions.
• Ensure that all tools and foreign parts are removed from the machine.
• Check if all casing parts are mounted on the machine.
To Next Page
Loading...
