Meiko FV 40.2 - Level 1

48 / 64
9020132
2. Enter the code for the required
level. For level 1, it is sufficient to
press the START key 5 times.
Level 1: Advanced settings (code
11111)
Level 2: Dosing settings (code
40044)
After entering the correct code, the
desired level (1, 4) is displayed in the
left field at the first digital position.
If the entry is incorrect, the Info 122
message appears.
10.7 Level 1
Code display
Meaning
View parameter, see page 48.
Vent (prime) rinse pipe, see page 33.
Vent (prime) detergent pipe, see page
33.
10.7.1 Viewing the parameters
1. Switch to level 1 (11111), see
page 47.
2. Select entry 1–1.
3. Confirm the selection.
The first parameter is displayed.