Meiko FV 40.2 - Dismantling and Disposal

58 / 64
9020132
Maintenance work
Checked
Cleaned
Replaced
Maintenan
ce
requireme
nt
(minimum)
Replace peristaltic hose and associated seals on
the nozzles
Once a year
11. Test run with functional test of entire machine
Check test wash and rinse results
Once a year
Visually check entire machine for leaks
Once a year
12. Water quality, temperature
Drinking water
°F
gpg
µS/cm
Once a year
Water quality after
water treatment (if
available)
°F
gpg
µS/cm
Once a year
13 Dismantling and disposal
In addition to valuable raw materials and recyclable materials, the packaging
and the old machine may also contain substances that are harmful to health
and the environment but were required for the function and safety of the old
machine.
13.1 Disposal of packaging materials
All the packaging is made from recyclable materials. The following materials are
used:
• Square timber frame
• Plastic sheeting (PE film)
• Foam material
• Cardboard packaging (edge protection)
• Packaging strap (steel strip)
• Packaging strap (plastic (PP))
• Transport safety bracket (stainless steel)