Meiko FV 40.2 - Maintenance Work; Maintenance Table

56 / 64
9020132
12.1 Maintenance work
IMPORTANT
Maintenance work must only be carried out by an authorized in-house
technician or an authorized service technician.
MEIKO recommends having the machine serviced by an authorized
service technician at least once a year and concluding a maintenance
contract. As part of the maintenance, an electrical safety inspection is
also carried out. Wear parts are checked and replaced, if necessary,
and the machine is tested. Neglected or improper maintenance
increases the residual risk of unforeseen damage to property and
persons, for which no liability will be assumed.
Wear parts include, for example:
• Dosing hoses
• Door seal
• Supply water hose
12.2 Maintenance table
Maintenance work
Checked
Cleaned
Replaced
Maintenan
ce
requireme
nt
(minimum)
1. Pumps
Check pumps for leaks and any visible damage
Once a year
Check pumps for running noise and correct func-
tion
Once a year
Check pump sieves for correct seating/function
Once a year
Check slide ring sealing/counter ring
Once a year
2.• Wash systems
Check water level in tank
Once a year
Check wash water pipe for leaks
Once a year
Check that wash arm is complete and generates
correct spray pattern
Once a year
Check rotating arm hub
Once a year
3. Fresh water final rinse
Check flow water pressure
Once a year