10 Settings
60
3. Follow the instructions in MELAconnect and read in
the QR code to connect your device to MELAconnect.
Alternatively, you can enter the IP address of your
device in MELAconnect manually.
Ê With manual entry of the IP address: Owners of multiple steam sterilizers of the identical device type
can differentiate between their devices by viewing serial number on the display to check whether
MELAconnect has been connected to the correct device.
Key tone
1. Select menu Settings > Key tone. The display
switches to the settings window.
2. Press YES or NO to determine whether a tone
should be emitted every time a pushbutton is
pressed. This can be deactivated at any time.
3. Accept all the settings with SAVE and then leave
the menu.
Screensaver
A screensaver can be activated to protect the display in standby operation. This displays a continuous
slide show of any pictures.
Select images for the slide show
1. Select theSettings >Screensaver menu.
To Next Page
Loading...
