10 Settings
61
2. Tap on a picture to select it. The white frame
around the picture indicates which picture is
currently selected.
3. Repeated tapping on the picture selects/deselects it
for the slide show.
Ê The checkmark on the lower right-hand corner
indicates whether the picture has been
selected for the slide show.
4. Press CONTINUE to make further settings.
Setting the display duration of the pictures and the waiting time of the slide show
Proceed as follows to alter one of the named options:
1. Select the parameter directly that you wish to change.
The marked parameters are displayed light blue.
2. Change the respective parameter value via the
and pushbuttons.
3. Confirm the settings with SAVE.
Ê The display switches automatically to the Settings menu.
Explanation of the slide show options
Display duration per
picture
indicates the time in seconds between the display of two separate pictures.
Waiting time indicates how long the display remains in normal mode before the slide show
starts.
Activated Setting/unsetting the checkmark activates/deactivates the screensaver.
Log printer MELAprint 42/44
If you wish to output the sterilization log via the log printer MELAprint 42/44, you need to set this on the
steam sterilizer once. The user manual of the log printer indicates how to set it up.
Label printer MELAprint 60
If you wish to output the sterilization logs via the label printer MELAprint 60, you need to set this on the
steam sterilizer once. The user manual of the label printer indicates how to set it up.
To Next Page
Loading...
