Meler B4 NON-STOP - 2 Introduction

2-1
INTRODUCTION MA-5081-E B4 NS ADHESIVE MELTER MANUAL
2. INTRODUCTION
This manual contains information on installing, using and maintaining the B4
NS adhesive melter from Meler.
This equipment is designed to melt 2 kilo blocks of adhesive (Ø128 mm and
height 165 mm). It has a 0.45 litre reserve tank. Moreover, in this B4 version
with gear pump, speed regulation is possible.
The equipment is mainly designed to be used with thermo-reactive PUR based
adhesives in block format.