Melitta Caffeo Bistro User Manual

ENGLISH
51
5 Switching on and off
5.1 Switching on the appliance
• Switch the power switch (Fig. B, No. 20) to position „I“.
→ The appliance is in stand-by mode. The ON/OFF button lights up red.
• Place a suitable vessel under the outlet.
• Press the ON/OFF button to switch the appliance on.
→ The ON /OFF button ashes. The appliance heats up.
The appliance performs an automatic rinse and hot water ows out of the
outlet. Then the ON/OFF button and the bean symbols illuminate.
The appliance is ready for operation.
5.2 Switching off the appliance
• If possible, place a vessel under the outlet.
• Press the ON/OFF button to switch the appliance to stand-by
mode.
→ The appliance performs an automatic rinse of the coffee lines. The brewing
chamber goes into resting position. The ON/OFF button lights up red.
• Switch the power switch (Fig. B, No. 20) to position „0“ to turn off the
appliance completely.
Notes
– The appliance performs an automatic rinse every time it is switched on.
– When the appliance is in stand-by mode, only switch it off using the power
switch, otherwise there is a danger that the brewing unit will not be in the
correct position.

Melitta Caffeo Bistro Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Countertop
Product color	Silver
Built-in display	No
Housing material	-