ENGLISH
71
11.6 Descaling the water tank
You should descale the water tank regularly to ensure faultless function.
• Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up
and out of the appliance.
• Before descaling, remove – if necessary – the Melitta
®
Claris
®
water
lter from the water tank (see page 52).
• Fill the water tank with a commercial descaling agent. We recommend
the rapid descaling agent in liquid form from Swirl
®
. While performing
the descaling, closely observe the instructions of the product
manufacturer.
• Then rinse the water tank thoroughly with clear water.
• When using the Melitta
®
Claris
®
water lter, reinsert it into the water tank
(see page 52).
• Fill the water tank to the max. mark with fresh tap water and reinsert it.