Melitta Caffeo Bistro - Adjusting the Brewing Temperature

60
10.4 Adjusting the brewing temperature
The brewing temperature is factory-set at level 2 (medium ).
Prerequisite: The appliance is in stand-by mode (see „Switching on and off“
on page 51).
Please set the brewing temperature as follows:
• Press the buttons for one-cup dispensing and for steam dispensing
simultaneously until the four buttons are weakly illuminated.
• Press the button for one-cup dispensing to select among the three
possible brewing temperatures.
→ The button for one-cup dispensing is brightly illuminated.
→ Your selection will then be shown with the bean symbols on the display.
Display Brewing
temperature
low
medium
(factory setting)
high
• Press the ON/OFF button to conrm the selected brewing
temperature.
→ Depending on the selection, 1 to 3 bean symbols ash on the display.
The appliance goes back to stand-by mode.