Melitta Caffeo Bistro User Manual

ENGLISH
59
10.3 Setting the stand-by mode
Two hours after the last action (depending on the settings), the appliance
automatically switches to stand-by mode. You can set different times for the stand-
by mode. The appliance is factory-set at 2 hours .
Prerequisite: The appliance is in stand-by mode (see „Switching on and off“
on page 51).
Please set the stand-by mode as follows:
• Press the buttons for one-cup dispensing and for steam dispensing
simultaneously until the four buttons are weakly illuminated.
• Press the button for two-cup dispensing several times to select
among the four possible timer settings.
→ The button for two-cup dispensing is brightly illuminated.
Your selection is shown with the bean symbols on the display.
Display Time
1 hour
2 hours
(factory setting)
4 hours
8 hours
• Press the ON/OFF button to conrm the selected time.
→ Depending on the selection, 1 to 4 bean symbols ash on the display as
conrmation. The appliance goes back to stand-by mode.
Note
In standby mode, the appliance consumes much less energy. However, we
recommend switching the appliance off via the power switch if it will not be
used for an extended period (e.g. also overnight).

Melitta Caffeo Bistro Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Countertop
Product color	Silver
Built-in display	No
Housing material	-