66
5 Open the lid of the ground coffee chute.
→ The ground coffee chute symbol ashes.
6 Throw in a cleaning tab (Fig. G) and close the lid of the ground coffee
chute.
→ The symbol for the water tank illuminates.
→ Phase 1 is completed.
Phase 2
During Phase 2, two bean symbols are shown on the display.
7 Flip up the lid of the water reservoir (Fig. A, no. 3) and pull the water
tank up and out of the appliance. Fill the water reservoir to the max.
mark with fresh tap water and re-insert it.
→ The button for steam dispensing illuminates.
→ Phase 2 is completed.
Phase 3
During Phase 3, three bean symbols are shown on the display.
8 Press the button for steam dispensing .
→ The integrated cleaning programme starts. This stage lasts approximately
10 minutes. The button for steam dispensing is then illuminated.
9 Empty the coffee grounds container and put it back under the outlet.
10 Press the button for steam dispensing .
→ Phase 3 is completed.
To Next Page
Loading...
