6
Safety symbols and instrument labels
Label Designation Description
Safety symbol
Warning, do not insert or remove the tubing,
do not insert ngers whilst the pump is in motion
Internal safety symbol Warning, surface may be hot during operation
Internal safety symbol Warning, risk of electric shock during operation
Power switch label Label for the unit’s main power switch
Light switch label Label for the unit’s switch to turn on the LEDs.
Water inlet label Point of connection for the unit’s water supply
Barcode reader label Connection port for the unit’s barcode scanner
Power supply label
Connection port for the unit’s power supply. The system power cord is the main
disconnect device. It must be easily accessible at all times. To prevent damage
to the power cord or plug, it is recommended to pull the plug rather than the
cord when you disconnect the system from a wall outlet or a power outlet. Make
sure the power cord is not a tripping hazard. Make sure that it is not gripped too
tightly at the plug, the outlet or the point where it is connected to the system.
24 DC label Connection for 24 volt peripheral
To Next Page
Loading...
