POWERHEAD
90-883728 JULY 2001 Page 4A-25
Removing Engine Components as an Assembly
VAPOR SEPARATOR TANK (VST) REMOVAL
CAUTION
Depressurize fuel system prior to opening line connections or removing fuel sys-
tem components.
1. Use Fuel/Air Pressure Gauge 91-16850A7 or Fuel Pressure Gauge 91-881834A1 to de-
pressurize fuel system. Direct fuel into suitable container.
2. Remove VST drain plug and allow fuel to empty into suitable container.
5887
a
b
c
a-Fuel Pressure Gauge 91-881834A1
b-Fuel Pressure Test Port
c-Drain Plug
To Next Page
Loading...
