Section 2 - Getting to Know Your Power Package
Page 24 90-864197076 NOVEMBER 2008
Your power package may be connected to a SmartCraft VesselView display. This display provides a single, easy‑to‑use source
for real‑time information about a variety of vessel systems. The interactive VesselView display continuously monitors and reports
information about speed and performance, trim angle, water temperature and depth, and other operating data. When VesselView
detects a problem with any connected system, it displays an alarm message to signal the problem to the boat operator.
Typical VesselView application
VesselView may also be connected to other vessel systems, such as GPS, generators, and cabin environmental controls. This
comprehensive vessel integration allows the operator to monitor and control a wide range of vessel systems from a single,
convenient display.
Digital Gauges
A Mercury SmartCraft System instrument package can be purchased for this product. A few of the functions the instrument package
will display are engine RPM, coolant temperature, oil pressure (requires a SmartCraft oil pressure sender kit), battery voltage, fuel
consumption, and engine operating hours.
SmartCraft digital gauges also feature troll control. This allows a vessel to maintain a constant speed with an engine speed between
500 and 1200 RPM.
SmartCraft gauges
a - Tachometer
b - Speedometer
c - LCD system view display
The SmartCraft instrument package also aids in Engine Guardian diagnostics. The SmartCraft Instrument package displays critical
engine alarm data and potential problems.
Refer to the manual with your gauge package for the warning functions monitored by and basic operation of the SmartCraft
instrument package.
To Next Page
Loading...
