Mercury MERCRUISER - Standby; Standby and Active Lights

Section 3 - On the Water
Page 52 90-899883295 JUNE 2008
STANDBY
The elements of the Standby screen are:
• In standby mode, the display shows a digital compass value and the angle of the drives.
• The compass value is the actual current heading from the GPS.
• On the right side of the screen, an icon labeled "OFF" indicates that Axius Premier s
not engaged.
NOTE: Not all of the functions of Axius Premier work when DTS functions are engaged.
Disengage the DTS functions to use the functions of Axius Premier .
31408
b
c
a
d
Standby screen on VesselView
a - "OFF" icon
b - Heading
c - Drive angle reference
d - Engine RPM
STANDBY
• In standby mode, the display shows a digital compass value and the angle of the drives.
• The compass value is the current heading from the Axius CAN.
• The icon labeled "OFF" indicates the Axius track pad is not engaged.
STANDBY AND ACTIVE LIGHTS
Axius Premier trackpad is off when the "STANDBY" light is illuminated. You must press a
button to activate Axius