Section 3 - On the Water
Page 54 90-899883295 JUNE 2008
2. Press the "AUTO HEADING" button to engage Axius. The button illuminates and beeps
once. The button will beep twice if auto heading does not engage.
a - Indicator lamp
b - "AUTO HEADING" button
3. Axius will hold the current compass heading the boat is following when the "AUTO
HEADING" button is pressed.
4. To adjust the heading while auto heading is active and the button light is on, press the
"TURN" button on the touchpad or tap (quickly move) the joystick.
5. To make a turn:
To Next Page
Loading...
